Normes IEC
Compléments des normes (Clarification sheets, decisions sheets, etc…)
IEC 60079-0:2017 | Part 0: Equipment – General requirements |
IEC 60079-1:2014 | Part 1: Equipment protection by flameproof enclosures « d » |
IEC 60079-2:2014 | Part 2: Equipment protection by pressurized enclosure « p » |
IEC 60079-5:2015 | Part 5: Equipment protection by powder filling « q » |
IEC 60079-6:2015+AMD1:2020 | Part 6: Equipment protection by liquid immersion « o » |
IEC 60079-7:2015+AMD1:2017 | Part 7: Equipment protection by increased safety « e » |
IEC 60079-10-1:2015 | Part 10-1: Classification of areas – Explosive gas atmospheres |
IEC 60079-10-2:2015 | Part 10-2: Classification of areas – Explosive dust atmospheres |
IEC 60079-11:2011 | Part 11: Equipment protection by intrinsic safety « i » |
IEC 60079-13:2017 | Part 13: Equipment protection by pressurized room « p » and artificially ventilated room « v » |
IEC 60079-14:2013 | Part 14: Electrical installations design, selection and erection |
IEC 60079-15:2017 | Part 15: Equipment protection by type of protection « n » |
IEC TR 60079-16:1990 | Part 16: Artificial ventilation for the protection of analyser(s) houses |
IEC 60079-17:2013 | Part 17: Electrical installations inspection and maintenance |
IEC 60079-18:2014+AMD1:2017 | Part 18: Equipment protection by encapsulation « m » |
IEC 60079-19:2019 | Part 19: Equipment repair, overhaul and reclamation |
IEC 60079-25:2020 | Part 25: Intrinsically safe electrical systems |
IEC 60079-26:2014 | Part 26: Equipment with Equipment Protection Level (EPL) Ga |
IEC 60079-28:2015 | Part 28: Protection of equipment and transmission systems using optical radiation |
IEC 60079-29-1:2016+AMD1:2020 | Part 29-1: Gas detectors – Performance requirements of detectors for flammable gases |
IEC 60079-29-2:2015 | Part 29-2: Gas detectors – Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
IEC 60079-29-3:2014 | Part 29-3: Gas detectors – Guidance on functional safety of fixed gas detection systems |
IEC 60079-29-4:2009 | Part 29-4: Gas detectors – Performance requirements of open path detectors for flammable gases |
IEC/IEEE 60079-30-1:2015 | Part 30-1: Electrical resistance trace heating – General and testing requirements |
IEC/IEEE 60079-30-2:2015 | Part 30-2: Electrical resistance trace heating – Application guide for design, installation and maintenance |
IEC 60079-31:2013 | Part 31: Equipment dust ignition protection by enclosure « t » |
IEC TS 60079-32-1:2013+AMD1:2017 | Part 32-1: Electrostatic hazards – guidance |
IEC 60079-32-2:2015 | Part 32-2: Electrostatics hazards – Tests |
IEC 60079-33:2012 | Part 33: Equipment protection by special protection ‘s’ |
IEC 60079-35-1:2011 | Part 35-1: Caplights for use in mines susceptible to firedamp – General requirements – Construction and testing in relation to the risk of explosion |
IEC 60079-35-2:2011 | Part 35-2: Caplights for use in mines susceptible to firedamp – Performance and other safety-related matters |
IEC TS 60079-39:2015 | Part 39: Intrinsically safe systems with electronically controlled spark duration limitation |
IEC TS 60079-40:2015 | Part 40: Requirements for process sealing between flammable process fluids and electrical systems |
IEC TS 60079-42:2019 | Part 42: Electrical safety devices for the control of potential ignition sources for Ex-Equipment |
IEC TS 60079-43:2017 | Part 43: Equipment in adverse service conditions |
IEC TS 60079-46:2017 | Part 46: Equipment assemblies |
ISO/IEC 80079-20-1:2017 | Part 20-1: Material characteristics for gas and vapour classification – Test methods and data |
ISO/IEC 80079-20-2:2016 | Part 20-2: Material characteristics – Combustible dusts test methods |
ISO/IEC 80079-34:2018 | Part 34: Application of quality management systems for Ex Product manufacture |
ISO/IEC 80079-38:2016 | Part 38: Equipment and components in explosive atmospheres in underground mines |
ISO 80079-36:2016 | Part 36: Non-electrical equipment for Basic method and requirements |
ISO 80079-37:2016 | Part 37: Non-electrical equipment for Non electrical type of protection constructional safety « c », control of ignition source « b », liquid immersion « k » |
Normes Amérique du nord
Pour obtenir une certification en vue de commercialiser un matériel à destination d’atmosphères explosibles en amérique du nord, le fabricant devra se mettre en conformité avec deux composants normatif majeurs:
Le National Electrical Code (NEC – NFPA 70) pour les USA & Le Canadian Electrical code (CEC part 1 – CSA 22.1) pour le Canada
Ces deux documents couvrent l’ensemble des exigences pour les équipements électriques et comportent tous deux un passage spécifiques aux atmosphères explosibles:
Les paragraphes 500, 503, 505, et 506 pour le NEC et la section 18 pour le CEC.
La certification pour l’amérique du nord pour les atmosphères explosibles (Hazlocs) implique au préalable la conformité de l’installation électrique pour un environnement non explosif.
Ainsi pour une installation complète, le fabricant devra souvent se conformé aux exigences associées à un panneau de contrôle (UL508) pour les USA et CSA C22.2 NO 14 pour le Canada)
Voici un résumé des bases normatives à prendre en compte en vue de la mise sur le marché américain d’un équipement à destination des atmosphères explosibles. Mais le processus est assez complexe et l’assistance d’ATEXELEC est fortement recommandée pour assurer votre succès.